Power Probe 3 PowerFlow circuit tester tests circuits under load
The Power Probe 3 PowerFlow circuit tester goes beyond a voltage measurement. The tester loads the circuit during the test. Wiring faults show up straight away. The tester also measures voltage and resistance and activates components with power or ground. The full integrity of an electrical circuit can be checked with one instrument.
Faults visible under load
PowerFlow technology loads positive or negative circuits. Hidden faults are revealed under real working conditions. That means faster diagnosis, less guesswork and time saved in the workshop.
The tester supplies battery voltage or ground to a component. Components in 12 V and 24 V systems can be activated directly. With the latch function, power or ground stays applied without holding the switch down. A 10 A self-resetting circuit breaker protects the tester and the vehicle circuit during testing.
Measuring voltage and resistance
The built-in DC voltmeter measures DC voltage and records the minimum and maximum values. Resistance can be measured up to 25 kΩ. For more extensive measuring work, the Snap-on EEDM604F digital multimeter is a good addition.
The tester can be extended with two adapter tips. The Power Probe current adapter tip measures current from 1 mA to 20 A. The Power Probe PWM adapter tip controls components with an adjustable PWM signal.
The Power Probe 3 PowerFlow circuit tester is available on its own, as a kit and as a master set.
Three versions
The Power Probe 3 PowerFlow is available in three versions.
- Power Probe 3 PowerFlow circuit tester (POWPP3PFRED): PP3PF circuit tester, 6 m power cable, probe tip, battery clamp set and alligator clip.
- Power Probe 3 PowerFlow circuit tester kit (POWPP3PFREDAS): PP3PF circuit tester, 6 m power cable, 6 m extension cable, probe tip, battery clamp set, alligator clip, 12 V DC adapter and storage case.
- Power Probe 3 PowerFlow circuit tester master set (POWPP3PFLS01): PP3PF circuit tester, 6 m power cable, 6 m extension cable, probe tip, battery clamp set, alligator clip, 12 V DC adapter, test leads in three lengths, small and large piercing probes, adapter sets and storage case.
The Power Probe 3 PowerFlow is featured in the Snap-on Hot Tools brochure for October and November 2026 and is available from the Snap-on dealer. All Power Probe products are listed on the Power Probe overview page.
Technical specifications
- Power and ground: 12 V and 24 V
- Voltmeter: DC voltage with min/max
- Resistance measurement: up to 25 kΩ
- Circuit breaker: 10 A, self-resetting
- Power cable: 6 m
- Part numbers: POWPP3PFRED, POWPP3PFREDAS and POWPP3PFLS01
Would you like to find out more following on from this article?
Please get in touch