Snap-on HJAWPBX10 FlankJaw water pump pliers adjustable in 35 positions
This text has been partly translated automatically. Spotted a mistake? Please contact info@snap-on.eu
Water pump pliers that grip a hex nut or bolt on the flats instead of on the corners. That is the idea behind the new Snap-on HJAWPBX10 FlankJaw water pump pliers. The pliers have the same 35-position adjustment as the AWPBX10 water pump pliers, with the FlankJaw geometry and the Talon Grip jaws added. The result is a pair of water pump pliers that grips hoses, pipes and fittings firmly, and that also loosens a seized bolt or nut without damaging the corners.
FlankJaw water pump pliers: grip on the flanks, not on the corners
Ordinary water pump pliers have straight or curved teeth. These bite into the corners of a nut or bolt. That works as long as the fastener comes loose easily. If it is seized, the pliers slip over the corner points. The corners round off, and after that the nut is hard to grip even with a spanner or socket.
The FlankJaw jaws take a different approach. Inside the jaws are angled contact surfaces that touch the hex on the flats, right next to the corners. The corner points themselves stay clear. This is the same principle as Flank Drive, known from Snap-on sockets and spanners. Because the force is applied to a surface and not to a point, more force can be applied: up to 30% more torque than with ordinary jaws. The fastener stays intact and the technician does not have to squeeze as hard.
The FlankJaw geometry works in one direction of rotation per side. An arrow on the jaw indicates that direction. With the pliers turned over, the geometry works the other way. This makes it possible to both tighten and loosen a hex fastener.
Close-up of the Talon Grip jaws: the diamond serrations on the jaw tip bite into the workpiece, while the angled surfaces behind them grip the hex on the flanks.
Talon Grip jaws for hoses, pipes and fittings
Besides hex fasteners, the pliers also grip round work. That is the job of the Talon Grip jaws. Talon Grip is the name of the Snap-on jaws with diamond serrations: small, sharp points that grip the workpiece like claws. The jaws are 10 mm wide. That gives a large gripping surface on hoses, tubes and fittings. The teeth are hardened and are as sharp and strong as the teeth of a file. Even on a greasy or wet hose clamp, the jaws do not slip. The maximum jaw opening is 57 mm, enough for thick coolant hoses and large union nuts.
Applications of the FlankJaw water pump pliers in the workshop
This is what the HJAWPBX10 is used for every day in the garage, the truck workshop and the motorcycle workshop:
- Removing and refitting hose clamps on coolant, air and fuel hoses.
- Loosening rusted exhaust clamps and their nuts without rounding off the corners.
- Holding brake, hydraulic and air conditioning line fittings while the union nut is loosened.
- Gripping bolts and nuts with a slightly damaged head, because the jaws grip the flanks and not the damaged corners.
- Holding round parts such as tubes, pipes, shafts and bushes during assembly.
- Working loose seized drain plugs, union nuts and fittings where a spanner cannot reach.
Closed jaws: the diamond serrations provide grip on hoses, tubes and fittings.
Quick adjustment in 35 positions
The FlankJaw water pump pliers are adjustable in 35 positions. The jaws always fit the workpiece precisely, with more control and precision when gripping. Adjustment works without a push button. The jaws open, slide to the right size and lock as soon as pressure is applied to the workpiece. That saves time, even when wearing gloves.
The pliers are 254 mm long. The Soft Grip handles provide comfort and control, even with wet or greasy hands. The length gives plenty of leverage. A seized fitting or nut comes loose with less effort.
Want to know more as a result of this article?
Get in touch